

Press the “Setup” button shortly: all LEDs will start to blink quickly. Press both “Setup” and “Mode” buttons simultaneously till all LEDs are blinking. You can reinitialise the adapter with following instructions: On the WLAN adapter: 1. How can I re-initialize the WLAN adapter to factory default settings? When in mode, go back to mode and return to mode by pressing the button, this to switch to another Wi-Fi channel. When trying to make a direct connection to the adapter ( MODE), the adapter is not visible in the available wi-fi networks list of the Smartphone/Tablet. Make sure that the Time Zone has been set correctly. You can check the current WLAN adapter date and time in the Daikin Online Controller application by tapping the applicable unit and then tapping “More” and “Time”. The timer actions are executed according to the WLAN adapter clock. The programmed timer action is not executed at the programmed time. If the router is set to Wi-Fi channel 12 or 13, change the router settings so another Wi-Fi channel is used within the range 1-11. The WLAN adapter does not support the use of Wi-Fi channels 12 and 13. Also check that the router is not set to use Wi-Fi channels 12 or 13 on your router’s setup page (ref. The range of the WLAN adapter can be reduced significantly by obstructions containing metal (e.g. Please check that your wireless router is close enough to your WLAN adapter. I cannot connect the Wireless Lan Adapter with my network. Smartphone control features vary for different models.

Adaptor card(s) can be installed inside the fancoil unit for selected models only.

